#BLACKVUE DASH CAM BLACKBOX DRIVER#
#BLACKVUE DASH CAM BLACKBOX MANUAL#

The camera model does not have a proximity sensor If nothing happens, the proximity sensor is faulty and should be replaced. Save settings and allow the camera to reboot.Īfter the normal reboot, confirm if Voice Recording can be activated/deactivated by waving a finger or touching the sensor. Access your Firmware Settings > System > Proximity Sensor > Voice recording.

#BLACKVUE DASH CAM BLACKBOX MANUAL#

(Only applies to cameras with a proximity sensor)Īctivate the manual recording function by accessing your Firmware Settings > System > Proximity Sensor > Manual recording.Ĭhange your proximity sensor setting to Voice Recording. The Proximity Sensor is either set to OFF or Voice Recording No Manual Recording (Front and Rear Cameras)

No Parking Files Recorded at all (Front and Rear Cameras)Īccess your camera's firmware settings and go to Basic > Recording > Parking Recording > Motion&Impact Recording or Timelapse Go to Firmware Settings > System > Speed Alert > OFFĪlternatively, go to Firmware Settings > System > Speed Alert > Select either kph or mph > Speed limit value If on, set the value in accordance with local speed limit values (e.g. Speed alert is on and the speed limit is set to either 0 or a very low value (kph/mph)ĭeactivate the Speed alert setting. Go to Firmware Settings > Sensitivity > G-sensor (Normal Mode) > 5 Lower the value of the G-senor (Normal Mode) to about 5 (or mid-setting) for all three axes. Upon stepping on the accel pedal, the first recording file is an Event file.

#BLACKVUE DASH CAM BLACKBOX DRIVER#

The camera may record a few normal and parking files upon engine on if the driver does not step on the accelerator pedal for at least five minutes. G-sensor (Normal Mode) settings are too high

No Normal Files Recoded when Driving (Front and Rear Cameras) Save settings and allow the camera to reboot. No Normal Files Recorded at all (Front and Rear Cameras)Īccess your camera's firmware settings and go to Basic > Recording > Normal Recording > ON You can also check the condition of your parking mode accessories ( Power Magic Pro, B-112 Battery, and B-124/X Battery) if they are in working condition. The first thing that needs to be checked if the camera seems to be not recording or responding is the power source.Ĭheck if the fuse of the cigarette power cable is in normal condition (refer to the picture below).

Blackvue dash cam blackbox